When you’re working on a construction project, whether it’s a small one or a large-scale site, there are many things that require accuracy and careful planning. And while most people focus on the big things like foundations, walls, and roofing, it’s easy to overlook something that seems minor but is actually very critical: the pits you use for utility.
Yep, we’re talking about concrete pits and electrical pits. These things might not get much attention during planning, but making one mistake can cause serious delays, extra costs, and safety headaches down the road. Let’s talk about the common mistakes people make when choosing pits—and how you can avoid them.
Don’t Ignore the Importance of Pits
One of the biggest mistakes in construction planning is not giving enough attention to your infrastructure. Obviously, it’s not the most exciting part of the job. But the truth is, poorly selected or incorrectly installed electrical pits can lead to major accidents later on. If the pit can’t handle the weight of the equipment above it, or if it’s placed in the wrong location, you might find yourself digging it up just to fix it.
These pits also play a key role in protecting electrical pipes and conduit systems that carry power throughout your site. If they’re not installed correctly, those pipes are at risk of being damaged, which could lead to electrical failures or safety hazards.
Take the time early on to plan where your pits are going, what size you need, and how they’ll be used. It’ll save you a lot of trouble later.
Pick the Right Type of Pit
Let’s bust a myth: all concrete pits are not the same. You can’t just pick any old pit and expect it to do the job.
Some are built for stormwater. Others are meant for cables, electrical pipes, or electrical connections. And within those categories, there are different load ratings and sizes. If you’re running heavy trucks over a pit that wasn’t made to handle that pressure—it’s going to crack. Then you’ll be stuck replacing it… and probably getting a few angry calls from the boss.
Always check what the pit is made for and make sure it suits your site’s needs.
Don’t Go for the Cheapest Option
Another common mistake? Choosing the cheapest pit on the market. Sure, it might save money today. But in a few months or years, you might be dealing with cracks, leaks, or electrical damage.
This is especially risky for electrical pits, which need to keep moisture out. Water can damage cables and electrical pipes, leading to shorts, corrosion, and potential safety issues. Cheap pits usually don’t last long, especially under tough conditions. Spend a little more initially to avoid bigger costs later.
Make Sure You Can Reach the Pit Later
Let’s say your pits are top quality and installed correctly. But if they’re hard to reach after construction is finished, now you’ve got a new problem.
It’s more common than you think. Sometimes pits end up hidden under driveways, covered by landscaping, or placed in awkward spots. That makes it difficult—or even impossible—for electricians or maintenance teams to access them later. Before you install, you should think about how people will get access to the pit and electrical pipes in the future.
Follow the Rules and Standards
Every construction project needs to follow local safety and building codes. Ignoring these rules with concrete pits or electrical pits can lead to failed inspections, expensive fixes, or worse—legal issues. Work with reliable suppliers who know the local standards and can help you stay within the rules and regulations from the start.
In Conclusion
Pits might seem like a small part of the project, but they play a big role in how everything works and stays safe. Making mistakes when choosing or installing concrete pits or electrical pits can lead to major problems later—especially if they’re connected to electrical pipes that power your site. So take your time. Think it through. Ask for help if you’re unsure. It’s always better to get it right the first time than to fix a more expensive mistake later.